aerocort inhaler now comes with a dose counter. It shows the numbers of puffs in the inhaler, as you use the inhaler, the dose counter will countdown & indicate the number of puffs remaining.
When there are 40 Puffs remaining, the colour of the numbers will change from green to red.
This indicates that fewer doses are remaining in the inhaler. You should now consider getting a new inhaler or ask your doctor if you need another one.
This means that there is no more medicine left in the inhaler and you need to discard the inhaler. Your inhaler may not feel empty and it may continue to operate, but you will not get the fight amount of medicine, if you keep using it beyond 0.
If you have not used your inhaler for a week or more. Shake well and release one puff into the air.
Important :-
Do not rush step 2, 3 and 4. It is important that you start to important that you start to breathe in slowly before releasing a puff. To ensure correct use of the inhaler, use it in front of a mirror for the first few times. If you see 'mist' coming out from the top of the inhaler or the sides of your mouth, start again from step 1. This escaping mist indicates incorrect technique.
In case of difficulty in using the inhaler correctly, you may use it along with a zerostat-VT spacer.
It is importance to keep your inhaler clean. Clean your inhaler at least once a week.
How to Know that your aerocort inhaler is Getting Over
When there are 40 Puffs remaining, the colour of the numbers will change from green to red.
This indicates that fewer doses are remaining in the inhaler. You should now consider getting a new inhaler or ask your doctor if you need another one.
When the dose counter displays 0
This means that there is no more medicine left in the inhaler and you need to discard the inhaler. Your inhaler may not feel empty and it may continue to operate, but you will not get the fight amount of medicine, if you keep using it beyond 0.
Before using aerocort inhaler
- Remove the cap from the mouthpiece and make sure that the mouthpiece is clean.
- Hold the inhaler away from your face. Shake if well and release two puffs into the air.
- aerocort inhaler is now ready for use.
If you have not used your inhaler for a week or more. Shake well and release one puff into the air.
Using your aerocort inhaler
- Sit or stand upright. Remove the mouthpiece cap and shake the inhaler well. Hold it upright. Place either one or two fingers on top of the canister.
- Breathe out fully, through your month.
- Place the mouthpiece of the inhaler in your mouth between your teeth and close your lips around it. Start breathing in slowly through your mouth. Press down the canister firmly and fully to release one spray while continuing to breathe in slowly and deeply.
- Remove the inhaler from your mouth and hold your breath for 10 seconds, or for for a long as is comfortable. Breathe out normally.
- If another puff is required, wait for at least 1 minute. Shake inhaler well and repeat step 2 to 4 after use. Replace the mouthpiece cap firmly and snap it into position.
- After taking each dose rinse your mouth with water and spit it out.
Important :-
Do not rush step 2, 3 and 4. It is important that you start to important that you start to breathe in slowly before releasing a puff. To ensure correct use of the inhaler, use it in front of a mirror for the first few times. If you see 'mist' coming out from the top of the inhaler or the sides of your mouth, start again from step 1. This escaping mist indicates incorrect technique.
In case of difficulty in using the inhaler correctly, you may use it along with a zerostat-VT spacer.
Cleaning your aerocort inhaler
It is importance to keep your inhaler clean. Clean your inhaler at least once a week.
- Take the mouthpiece cap off. Do not take the metal canister out of the actuator.
- Wipe the inside and the outside of mouthpiece with a clean, dry cloth.
- Replace the mouthpiece cap.
- Do not wash or soak any part of the inhaler in water.
Related Posts
Comments
Post a Comment