Features
- Capable to edit transponder, symbol rate and LO frequency ency etc. .
- Accurate and convenient facility for antenna installation
- Support 0/22KHz control
- Support DisEqc 1.0 control
- With signal strength and quality display
- Support DVB-S2 function
Function
The function can calculate antenna elevation, azimuth and LNB Polarization angle according to satellite longitude, local location longitude and hemisphere parameter setting, it is useful for receiving installation.
Operation
1. Move cursor to "Angle Calculation" press "OK" to enter as following.
2. Press "UP" or "DOWN" button to move cursor to the parameter and press "OK" button to enter, press "LEFT" or "RIGHT" button to select digit position, then press "UP" or "DOWN" button to set the number, press "Exit" button to confirm and exit current setting.
3. The letter "E", "W", "N" and "S" means East longitude, West longitude, North hemisphere and South hemisphere respectively. These letters can be set similarly.
4. The angle data can be calculated and displayed automatically when parameter is setting. Elevation angle is counted from horizon upward, azimuth angle is from North clockwise.
5. Press "EXIT" button to exit the menu.
Connecting diagram
Specification :-
Operation
1. Move cursor to "Angle Calculation" press "OK" to enter as following.
2. Press "UP" or "DOWN" button to move cursor to the parameter and press "OK" button to enter, press "LEFT" or "RIGHT" button to select digit position, then press "UP" or "DOWN" button to set the number, press "Exit" button to confirm and exit current setting.
3. The letter "E", "W", "N" and "S" means East longitude, West longitude, North hemisphere and South hemisphere respectively. These letters can be set similarly.
4. The angle data can be calculated and displayed automatically when parameter is setting. Elevation angle is counted from horizon upward, azimuth angle is from North clockwise.
5. Press "EXIT" button to exit the menu.
Connecting diagram
Specification :-
| Frequency Range | : 950MHz-2150MHz |
|---|---|
| Input Level Range | : 25dBm~-65dBm |
| Input Impedance | : 75 |
| Symbol Rate | : 1Msps~45Msps |
| Operating Temperature | : -10°c~50°c |
| QPSK, 8PSk Demodulation | : Supported |
| 22KHz Control | : Supported |
| Connectors | : F Type Female |
| To LNB | : 13V,18V,500mA |
| Power Supply Input | : AC 110-220V 50Hz/60Hz |
| Power Supply Output | : 13V DC 1000mA |
Comments
Post a Comment