How to Connect Internet
First Plug In Dongal, Adapter, Mobile with data Cable or hotspot on USB Port. Now Press MENU Button and Enter Password 0 0 0 0.
Scroll down and go to
System Setup
Now go to Network Setup
Press Link Type and Select which you have available (Wifi Network, 3G Network, USB Network or Ethernet Network)
Now Press Config.
Show Available Network.
If available Network 👜(Lock) Enter Password.
Now Press box for Next time open Network to Auto Connect.
Now Press to Link.
Network Connect Successful!
Any File Transfer
- No need Computer/Laptop
- No Need Cyber Cafe
- Mobile to Pendrive
- Mobile to Mobile
- Pendrive to Mobile
How to Transfer ?
- First Press 🌑 Media Storage Button and 🔻Down key to Select and Press Disk Manager
- Press Red Button and Choose 🔺🔻 Up/Down Button to From USB1/USB2 and Press and Select Folder/File
- Press Green Button
- 🔺🔻 Up/Down key to Transfer file USB1/USB2 and Select your transfer Folder
- File Copy for Yellow Button
- File Move for Blue Button
Wait Until Transfer Processed
Now your file Transfer Complete Show on Screen
Normally available file in Zip Format but this format will not Upgrade in your Solid 6141 so Install Zip Manager app on your mobile or Desktop and Zip file to Unzip. Enter your Mobile or Desktop File Manger and appears file Format Zip to bin. your Desktop or mobile Simply copy the upgrade bin file into the USB Pen Drive or mobile SD Card and push the USB Pen Drive or Mobile Connect by Data Cable into the SetTop Box USB interface, Start SetTop Box and Press Menu Button Enter Password 0000. Go to 🔻 Press Preference and Go to 🔻 Press SW Upgrade and Select Unzip File .bin, then you can Upgrade.
2. Online Internet Upgrade
You can use Upgrade online page to upgrade Software and Other Files.
3. USB auto boot System
Normally available file in Zip Format but this format will not Upgrade in your Solid 6141 so Install Zip Manager app on your mobile or Desktop and Zip file to Unzip. Enter your Mobile or Desktop File Manger and appears file Format Zip to bin and now rename file name Type Name rom and save. Start a SetTop box and Pen Drive or Mobile to plug in USB Port and connected and Press SetTop Box'sᇰPower Button then Press 🔘 OK Button just few seconds, automatic detect file and Upgraded.
Add Biss(CW Key)
Many users are update illegally software on their SetTop box and result error or Dead Set Top Box. Please Use only Original Software with add CW Key(Biss Key). If you have Official CW Key(Biss Key) follows this introduction to add CW(Biss Key).
POS (Green Button) click in your Remote(Show Remote Top)
CAID : Click Red Button to Add 4 Character Channel CAID and Blue Button for Save(Confirm) (Double Click Remote Info Button Show Channel SSID)
Service ID : Click Green Button to Add 4 Character Channel Service ID and Blue Button for Save(Confirm)
ProvID : Click Yellow Button to Add Channel ProvID and Blue Button for Save(Confirm) (Normally 1 Character but not compulsory)
CW Key : Click Blue Button to Add 8 to 16 Character Channel Biss Key (CW Key)
Exit for Save and Enjoy your Channel
Watch YouTube Videos
How to Play IPTV Channels?
How to Play IPTV Channels?
FEATURES
- Advance HD MPEG2/MPEG4/H-264/VC-1 fully DVB-S/S2 compliant
- IPTV support
- DLNA and Samba support
- Network App Support
- USB, WiFi, 3G Modern, GPRS Modern support. (Supported WiFi Device : View adapter)
- Update SW and Database and keys separate via USB and online FTP server
- USB boot recovery software system
- 32 favorite groups
- 2 high speed USB 2.0 supported
- Fully support 7 days EPG
- Multi Language
- Fast blind scan, auto and manual search
- Subtitle support
- Parents control
- Max 8000 channels and 2000 Transponders
- Full video resolution 1080p/1080i/720p/576p/576i/480p/480i
- FAT16/32 NTFS file system support
Rearpanel
- LNB IN : Connect to the satellite dish for signal
- Loop : Connect to the another receiver
- Ethernet port : Connect to the PC or another receiver
- HD Port : HD out
- RCA : AV model only
- USB Port : 2
- POWER INLET : Connect to the data cable Power cord
- Power Switch : On/Off switch for AC power
Remote control
- ℹ Standby (On/Off)
- Mute : Press to Mute the sound
- TXT (Red) : Display Teletext information
- POS (Green) : content.cw edit
- SUB (Yellow) : Subtitles
- TIMER (Blue) : Set Timer
- Recoding and PVR keys : 🔴 REC ⬛ STOP || PAUSE ▶ PLAY ⏪ BACK ⏩ FORWARD
- FAV : Press to display favorite Channel List
- SLEEP : Set Timer for receiver off
- AUDIO : Select the item in the audio mode
- RECALL : Show the information of previous channels being watched up to 10 channels.
- MENU : Press to display the Main Menu.
- EXIT : Press to escape from the current mode.
- NAVIGATION KEYS : ◀▶🔺🔻
- OK : Press to select the item in the menu or to list the TV/Radio channels.
- INFO : Display the information of the current program.
- EPG : Display the Electronic Program Guide
- VOL : + - Volume
- USB MEDIA : Play USB Storage
- Access : CC Scam and Powerview menu
- Numeric Key Pad : 1 2 3 4 5 6 7 8 0
- TV/RADIO : Tune TV or Radio
- SAT : Satellite list
Recoding (PVR)
Recoding would be restricted in transponder (TP) of the channel that is recoding. That is, channel change is only enabling in a TP while recoding. To go to other TP/Satellite, then press STOP key to exit. This is inevitable limitation of single tuner recording method. Press (🔴) key to start record, system will has 3 seconds for initialization as shown in the pictures.
When initialization success, the screen lift top will show REC icon, recording and playing current program. Press INFO key to watch current recording information. Press STOP key while recoding, will stop record and resume normal playback mode. In the recoding, press REC key to set timer for subscribe stop record
When initialization success, the screen lift top will show REC icon, recording and playing current program. Press INFO key to watch current recording information. Press STOP key while recoding, will stop record and resume normal playback mode. In the recoding, press REC key to set timer for subscribe stop record
Significant Tips
- Press INFO key while recoding, it show all lists being recorded on local storage. It can be playback pressing OK key and press ⬛ key for stop playing.
- Press ⏩ or ⏪ while recording, then it moves fast forwards or backwards like Time shift function. Also press ▶ key for playback after forward/backward of recoding content. To stop Timeshift, press key and press ⬛ it once again then it stops recoding.
INSTALLATION
There are 5 options under this directory.
1. Satellite Setup
2. Satellite List
3. TP List
4. Motor Setting
5. Limit Setup
Satellite Setup
- Satellite : Choose a satellite from the database and set up the following parameters. There are many satellites being stored in default.
- LNB Type : Select Ku or C Band
- LNB Frequency : Select the local oscillation frequency.
- Transponder : This is a satellite frequency which is used to display the signal quality, facilitating to adjust relevant parameters.
- 22K : Set 22K tone signal to On or OFF
- LNB Power : Set Power supply to ON or OFF for LNB use.
- Tone Burst Mode : Set Tone Burst A, Tone Burst B and None. The default is OFF.
- DiSEqc Mode : Set Port 1 to 6 and disable.
Satellite List
This Satelite List menu shows all satellites stored in system with Satelite Name, Position and Longitude.
You can do ADD, EDIT, DELETE, and SCAN action with Color Key on your Remote.
TP List
TP List
You can move the cursor to TP List then press OK to enter into manual search page. TP List shows saved all the transponders in selected satellite, and every transponder may be has some A/V channels. Then press the 4 color key on the remote controller press the RED key to add transponder, the GREEN key to edit the TP, the YELLOW key to delete the TP, and the BLUE key to scan the TP in manual.
Motor Setting
In the menu, you can setup
Motor Setting
In the menu, you can setup
- Satelite : Select the satellite you want to use.
- Transponder : Select the Transponder of the motor.
- Motor Setting : Select the Disable, USALS, DisEqc1.2 to setup motor.
- After setup, press Blue key to scan.
Limit Setup
1. Limit Setup : Select Disable Limits set east limits and set west limits.
Disable Limits : no extreme coordinate
Set East Limit : Set up the eastbound extreme coordinate
Set East Limit : Set up the eastbound extreme coordinate
Set West Limit : Set up the westbound extreme coordinate
2. Continuing move : Set move direction continuously.
Move east : Rotate in the eastbound way
Move west : Rotate in westbound way
Stop : Pause
3. Move Step : Press ◀ once and MOTOR rotate to the east by one step; Press ▶ and MOTOR rotate to the west by one step.
2. Continuing move : Set move direction continuously.
Move east : Rotate in the eastbound way
Move west : Rotate in westbound way
Stop : Pause
3. Move Step : Press ◀ once and MOTOR rotate to the east by one step; Press ▶ and MOTOR rotate to the west by one step.
Related Posts
Thanks for sharing this article here about the Iptv Service Providers. Your article is very informative and I will share it with my other friends as the information is really very useful. Keep sharing your excellent work.
ReplyDeleteYour website is very beautiful or Articles. I love it thank you for sharing for everyone. How to install IPTV on Smart TV
ReplyDelete